The GPT is short for GUID Partition Table, introduced as part of the Unified Extensible Firmware Interface (UEFI) initiative. GPT provides a more flexible mechanism for partitioning disks than the older Master Boot Record (MBR) partitioning scheme that was common to PCs. Learn more…
Symptom: When you plug Windows XP 32-bit Operating System with an internal or external hard drive, the data on drive is inaccessible and in Disk Management it recognizes the disk as a GPT Protective Partition. Right-click on it, there is no available options in the drop-down menu. In other words, the drive cannot be partitioned or formatted under the circumstances.
Reason: The internal or external hard drive was previously configured as a GPT partition in either a Windows or Macintosh computer. Because 32-bit version of Windows XP cannot read, write, and boot from GPT disk. It will only see GPT Protective partition (the Protective MBR). The EE partition will not be mounted or otherwise exposed to application software.
Solution: Diskpart command-line utility is a traditional way to access GPT Protective Partition by removing GPT disk from the current in-focus disk, however, it is a data destructive process. Nowadays, AOMEI Dynamic Disk Manager allows you to access GPT Protective Partition by converting to MBR partition and ensure data integrity.
The following instruction provides the steps to change a hard drive connected in an existing Windows XP 32-bit Operating System from GPT Protective Partition to MBR partition while keeping data safe.
Note: MBR disk supports only four partition table entries. Therefore, the solution only applies to the hard drive previously configured as at most four GPT partitions.
Tips: To begin, you can Download Demo Version of the software to try:
>> Free Download AOMEI Dynamic Disk Manager Pro Edition (File Size: 14.4MB)
Step1: Launch AOMEI Dynamic Disk Manager and select the disk which is shown as "GPT Protective Partition" in Disk Management snap-in. Then, click "Convert to MBR Disk" in the left navigation.
Step2: In the pop-up window, click "OK" to convert disk from GPT to MBR.
Step3: Click "View Pending Operations" on the toolbar to confirm the conversion from GPT disk to MBR. After that, click "Commit" to perform the change.
Step4: The operation requires rebooting. After restarting computer, you will find "GPT Protective Partition" issue has been solved. You can access data from the partition again.
Apart from the conversion from GPT disk to MBR, AOMEI Dynamic Disk Manager also allows you to resize dynamic disk, extend dynamic system volume, expand/shrink/move dynamic mirrored partition, convert dynamic disk to basic and vice versa, add drive to software RAID 5, remove drive from software RAID 5, move volume slice, etc.