Convert Dynamic Disk to Basic Disk Windows Vista

From a article, I noted how to upgrade your operating system from Windows XP Professional to Windows Vista, only to then find that you can't access your partition on a dynamic disk if Vista Edition is a Vista Home Basic or Vista Home Premium. This is most likely due to your version of Vista Home version not supporting dynamic disk, which probably need to upgrade to Vista Ultimate Edition, to be able to access the dynamic disc. If you aren't prepared to do that, but still hope to be able to use the disk, you only can convert it back to a basic disk for the problem. The back is that you will lose all of your data, since the process is to first delete the partition on the disk unless you choose to use Dynamic Disk Converter tool for the conversion back in Vista. Otherwise, you may back up data requried to avoid data loss.

Vista Convert Dynamic Disk to Basic Disk with Dynamic Disk Converter

Dynamic Disk Converter main purpose is to convert dynamic disk to basic without losing data and deleting partition, and also it's able to clone any dynamic volume to basic partition, such as convert C: drive to basic partition. Using the converter in Vista just cost $29, it's absolutely safe and easy!

1. Here is a instance, convert my dynamic disk to basic shown below:

2. launch the software (Dynamic Disk Converter) and skip the welcome screen, and you will see the main interface of the software:

On the above screen, check Method 1 (Convert a dynamic disk back to basic disk), and click on the Next button.

3. On Windows Vista system, all of dynamic disks which you could want to convert to basic disk will be shown in the following list box, please select a dynamic disk that you wish to convert. In instance, the hard disk 1 (C: drive and D: drive) will be converted, and click on the Next button to continue.

4. Then, you will see the screenshot below, ask for you confirm convert the Vista System Dynamic Disk to Basic Disk:

Click the Proceed button to begin work, the process only take 3 seconds to finish, then reboot your Windows Vista Operating System, and you're done!

The whole process is safe and reliable, revert and change it to basic disk wihtout deleting partition, without loss of data with Dynamic Disk Converter in Windows Vista.
Click here to download, here to buy.

Related article:
Three ways to convert dynamic disk to basic disk